Additional information
| Weight | 5 kg |
|---|
LUMii BLACK Blade 200w LED Fixture 2.6
£250.00
LUMii BLACK Blade 200w LED Fixture
The LUMii BLACK Blade 200w LED is a compact, cool-running and efficient plate-format LED alternative to 250 W and 400 W HID and 315 W CMH lamps. Giving full, balanced spectrum 3500K white light with added 660 nm Osram chips, it is the ideal light source for the entire plant lifecycle. The fixture is large enough to light a growing area up to 1 m2 and can also be used as auxiliary lighting in a larger grow room. Dimmable using integral control and can be scheduled using a plug-in timer. Powered directly by mains electricity via the 2 m power lead supplied. Complete with hanging slings for easy installation.
Key selling points:
- Full, balanced spectrum white light with added 660 nm Osram chips, suitable for the whole plant life cycle
- Simple to install and operate
- Compact and lightweight
- Very low heat output and excellent dissipation
Technical Specifications:
| Input Power | 200 W |
| Input Voltage | 100 – 277 V AC / 50 – 60 kHz |
| Input Current | 2 A @ 100 V, 0.72 A @ 277 V |
| Efficacy | 2.6 µmol/J @ 220 V AC |
| PPF | 520 µmol/s |
| Light Radiation Angle | 120° |
| IP Rating | IP65 |
| Overall Dimensions | 305 mm x 505 mm x 104 mm (12.0” x 19.9” x 4.1”) |
| Weight | 3.4 kg (7.5 lb) |
| Operating Ambient Temperature & Humidity | 0° C – 40° C (32° F – 104° F). Max RH 95% |
| Storage Temperature & Humidity | -40° C – 70° C (-40° F – 158° F). Max RH 85% |
FAQs:
Q: Can I use the LUMii BLACK Blade 200w LED for my whole growing cycle?
A: The LUMii BLACK Blade 100w LED gives full, balanced spectrum white light and is ideal for use throughout the complete plant life cycle.
Key selling points:
- Enhanced blues – ideal for propagation and vegetative growth
- Simple to install and operate
- Compact and lightweight
- Very low heat output and excellent dissipation
Technical Specifications:
| Input Power | 100 W |
| Input Voltage | 100 – 277 V AC / 50 – 60 kHz |
| Input Current | 1 A @ 100 V, 0.36 A @ 277 V |
| Efficacy | 2.6 µmol/J @ 220 V AC |
| PPF | 260 µmol/s |
| Light Radiation Angle | 120° |
| IP Rating | IP65 |
| Overall Dimensions | 215 mm x 425 mm x 92 mm (8.5” x 16.7” x 3.6”) |
| Weight | 2 kg (4.4 lb) |
| Operating Ambient Temperature & Humidity | 0° C – 40° C (32° F – 104° F). Max RH 95% |
| Storage Temperature & Humidity | -40° C – 70° C (-40° F – 158° F). Max RH 85% |
FAQs:
Q: Can I use the LUMii BLACK Blade 100w LED for my whole growing cycle?
A: The LUMii BLACK Blade 100w LED gives full-spectrum white light with enhanced blues. This makes it ideal for propagation and vegetative growth. It is intended for use with seedlings, cuttings, leafy greens and non-flowering herbs. But because it lacks enhanced reds, we do not recommend it for use with plants at the flowering or fruiting stages.
Key selling points:
- Lightweight and easy to install
- Energy-efficient with a long working life
- Multiple units can be powered from a single outlet
- Two or four lamps, switchable as required
Technical Specifications:
| Input voltage | 220 V – 240 V / 50-60 Hz |
| Input power | Max 75 W |
| Lamp wattage | 18 W |
| Colour temperature | 6000K |
| Rated Life | 25,000 hrs |
| Lumen Efficacy | 130 lm/w |
| IP Rating | IP40 |
FAQs:
Q: How can I link more than one EnviroGro by LUMii 120cm (4ft) 4 Lamp TLED Fixture?
A: There are 2 power sockets on each fixture. The (male IEC) socket nearest to the on/off switch is the power input. The (female IEC) socket at the opposite end is power output. To link fixtures, use a LUMii Extension/Link Lead of appropriate length to connect the power output socket of the first Fixture to the power input socket of the second fixture, and so on. Ensure that the total load at the power socket does not exceed 6 Amps.
Q: Can I link EnviroGro by LUMii TLED Fixtures of different sizes?
A: Yes, the TLED Fixtures all use the same voltage, so it is OK to link units of different sizes, provided that the total load at the power socket does not exceed 6 Amps.
Out of stock
