Lumatek ATS 300W PRO LED 2.7

The Lumatek ATS 300W Pro Led 2.7 are built using high quality Lumatek controllable drivers and latest generation higher efficiency top bin White, Red & Far Red Diodes.

The upgraded diodes are now more evenly distributed across the whole length of the light bars resulting on a larger and more even light spread and footprint.

Other new features of this line include: New IP65 rating; Clear Glue protection cover technology on the LED bars, resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes and extra corrosion resistance; And new Control capability with the Lumatek Control Panel Plus 2.0.

Full Spectrum
Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption.

Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

Passive cooling
Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

External Control
The ATS Pro fixtures can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

Universal Control Systems Compatibility
Lumatek ATS Pro LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.

KEY SPECIFICATIONS

Product Code: LUMLED300P
Efficacy: up to 2.7 µmol/J
PPF: 816 µmol/s
Input Voltage: 220-240V, 50-60Hz
Input Power: 310W (±2%)
Footprint: Up to 1x1m
Waterproof: IP65
Lifetime: +60 000 hrs
Light Distribution: 120°
Light Source: Higher Spec White, Red & Far Red Diodes
Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
External Control: With Lumatek Digital Panel Plus 2.0
Weight: 5.2 Kg
Dimensions: 559.5×559.5×71.6mm
Spectrum: Full Spectrum +
BTU (With Driver Attached): 1082 BTUs/h (Max)
BTU (With Driver Remote): 1006 BTUs/h (Max)

LIGHT DISTRIBUTION 120° (Beam Angle)
LIGHT SOURCE Higher Spec White, Red & Far Red Diodes
INPUT VOLTAGE 220-240 V AC, 50-60 Hz
INPUT POWER 310 W (1.35 A @230 V AC)
EFFICACY 2.7 µmol/J
PPF 816 µmol/s
FOOTPRINT 1 x 1 m
POWER FACTOR > 0.95
DIMMING OFF-25-50-75-100% with 0-10V Light Dimmer (incl.)
EXTERNAL CONTROL With Lumatek or any Universal Controllers 0-10 V
DAISY CHAIN CAPABILITY Yes
WEIGHT 5.2 Kg
DIMENSIONS 560 x 560 x 72 mm
SPECTRUM Full Spectrum +
THERMAL MANAGEMENT Passive
LIFETIME L90 > 60000 hrs
WARRANTY 3 Years
IP RATING IP65
CERTIFICATIONS CE, EMC, LVD
LVD Plug & Play CONTROL TECHNOLOGY